Tynor Ankle Binder D01 – Adjustable Ankle Support

Tynor Ankle Binder D01

The Tynor Ankle Binder D01 combines a contoured ankle sleeve with a detachable support strap. Designed to provide external support and compression around the ankle, it features a flexible pull-on construction and an adjustable fastening system. The two-part design brings together the close fit of a sleeve and the additional adjustment offered by a separate binder strap.

At Authentic eBangla, review the product details, photographs and size guide before selecting your preferred variant. The model code D01 identifies this Ankle Binder within the Tynor range. Choose the support according to the recommended requirements and manufacturer sizing guidance.

Contoured Ankle Support

The anatomically shaped sleeve follows the contours of the ankle. Its construction is designed to provide compression around the covered area, while the heel section helps position the sleeve during fitting.

A suitable fit starts with the correct size. When putting on the binder, check that the sleeve sits smoothly and that the heel section is properly aligned. Avoid leaving folds in the fabric, particularly beneath the support strap. Follow the supplied instructions for positioning rather than relying only on product photographs.

Detachable Support Strap

The detachable binder strap adds a separate layer of support around the ankle. It allows the fastening to be adjusted after the sleeve has been positioned, providing flexibility during fitting and removal.

Secure the strap in the arrangement shown in the manufacturer’s instructions. Check that it lies flat and that the fastening is properly engaged. The strap should not be tightened excessively to compensate for a sleeve that is too large. Correct sizing and appropriate strap adjustment work together to establish the fit.

Flexible Knitted Fabric

The Tynor Ankle Binder D01 features airy knitted fabric with four-way stretch. This construction allows the material to follow the ankle’s shape and provides ventilation through the knit.

The fabric’s flexibility is a useful feature when comparing different ankle support designs. However, the appropriate activity and wearing duration depend on individual requirements. If a healthcare professional has recommended the binder, follow their guidance on when and how to use it.

Soft Heel Region

A soft heel region is incorporated into the design at the heel contact area. Correct alignment helps keep this section in its intended position when the sleeve and strap are fitted.

Check the heel area after application and again after securing the binder strap. If the fabric gathers or the support shifts, review the fitting instructions and confirm the selected size. Avoid cutting the sleeve or changing its shape to make it fit differently.

Slim Design for Suitable Footwear

The D01 has a slim design intended to fit inside suitable shoes. This makes footwear compatibility an important consideration when selecting and fitting the support.

Try the shoe with the binder correctly positioned and check the available space around the ankle. Footwear should accommodate the support without excessive pressure from the upper, collar or fastening. The fit of a shoe can change when an ankle support is worn, so check it before beginning the recommended activity.

Choosing the Correct Size

The Tynor Ankle Binder D01 is offered in Small, Medium, Large and Extra Large variants. Use the relevant manufacturer size chart instead of choosing by normal shoe size.

Tynor’s measurement guidance is to keep the leg straight and measure the circumference approximately 5.1 cm above the inner ankle joint. Compare that measurement with the product size chart. Follow the chart’s guidance when a measurement falls near the boundary between sizes.

If ordering for someone else, obtain the required measurement before selecting a variant. Confirm the available size and stock status at Authentic eBangla before completing the order.

Care and Everyday Handling

Read the instructions supplied with the product before first use. Follow the manufacturer’s cleaning, drying and storage recommendations to maintain the sleeve and fastening components.

Inspect the fabric, seams and detachable strap regularly. Keep the fastening surfaces free from lint and avoid adding improvised attachments. If the binder causes irritation, numbness or unusual discomfort, stop using it and seek professional advice.

Product Details

Brand: Tynor
Product Name: Ankle Binder
Model: D01
Colour: Grey
Size Options: S, M, L, XL
Package Contents: One ankle binder with detachable support strap

The Tynor Ankle Binder D01 provides a contoured sleeve and adjustable strap in one ankle support design. Select the correct size and use it according to the supplied instructions and healthcare professional guidance.